18 Years Factory Waste Water Filter System - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Usually customer-oriented, and it's our ultimate focus on to be not only by far reliable, trustable and honest provider, but also the partner for our customers for Osmosis Membrane , Uf Membrane , Hollow Fiber Membrane Water Filter , Any needs from you'll be paid out with our notice!
18 Years Factory Waste Water Filter System - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo Detail:

Applications

●Production of mineral water, mountain spring water and other germ-free liquid.
●Drinking treatment of tap water, surface water, well water and river water.
●Pre-treatment of RO device.
●Treatment, recycle and reuse of industrial wastewater.

Filtration Performance

According to the service conditions of modified PVC hollow fiber ultrafiltration membrane which  are  applied to various water  sources, the  product  is  proved to reach below filtration effects:

Water Composition Filtering Effect
Suspended Substances, Particles >1um Removal Rate ≥99%
SDI ≤ 3
Virus, Bacteria >4 log
Turbidity <0.1NTU
TOC Removal Rate 0-25%

Above data is obtained when turbidity of feed water is less than 15NTU. The product is proved to reach the sanitary standards of drinking water by Health Department of Guangdong Province. Approval number is YUE WEI SHUI ZI 2014 S1671.

Product Parameters

Product Appearance

product-description1

Figure 1 Product Dimensions

Technical Parameters

Structure Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Nominal Membrane Area 16.5m2
Membrane ID/OD 1.0mm/1.8mm
Module Dimensions Φ180mm×1382mm
Connector Dimensions DN25 Female Thread

Application Data

Pure Water Flux 7,000L/H (0.15MPa, 25ºC)
Designed Flux 35-100L/H (0.15MPa, 25ºC)
Operating Pressure ≤0.2MPa
Maximum Trans Membrane Pressure 0.2MPa
Maximum Operating Temperature 45ºC
Operating PH Range 4-10
Washing PH Range 2-12
Operating Mode Cross-flow/Dead-end Filtration

Feed Water Requirements

A security filter, precision <50 micron, should be set as pretreatment of UF, in case of  blockage caused by large particles  in  raw water. Attention: UF membrane material is macromolecular organic plastics, raw water must not contain any organic solvents.

Feed Water Turbidity ≤15NTU
Oil & Grease ≤2mg/L
Feed Water SS ≤20mg/L
Total Iron ≤1mg/L
Continuous Feeding Residual Chlorine ≤5ppm
COD Suggested ≤500mg/L

Component Material

Component Material
Hollow Fiber Membrane Modified PVC
Potting Material Epoxy Resins
Membrane Housing SUS304

Typical Operating Parameters

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2 .h
Backwashing Frequency Every 30-60 minutes
Backwashing Duration 30-60 seconds
CEB Frequency 0-4 times/day
CEB Duration 5-10 minutes
CIP Frequency 1-3 months
General Washing Chemicals :
Disinfection 15ppm NaClO
Organic Contamination Washing 0.2% NaClo+0.1% NaOH
Inorganic Contamination Washing 1-2% Citric Acid /0.2% HCl

Product detail pictures:

18 Years Factory Waste Water Filter System -
 UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures

18 Years Factory Waste Water Filter System -
 UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures


Related Product Guide:

Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for 18 Years Factory Waste Water Filter System - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo , The product will supply to all over the world, such as: Mexico , Stuttgart , UK , With the enterprising spirit of high efficiency, convenience, practicality and innovation, and in line with such serving guidance of good quality but better price, and global credit, we are striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
  • The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Gill from Montpellier - 2018.09.23 17:37
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Kevin Ellyson from Morocco - 2018.09.21 11:44
    Write your message here and send it to us