China Manufacturer for Water Membrane Filtration - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo
China Manufacturer for Water Membrane Filtration - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo Detail:
Applications
Production of mineral water, spring water, or other sterile liquid.
Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.
Filtration Performance
This product is proven to have below filtering effects according to the service conditions of different water sources:
| Ingredient | Effect |
| SS, Particles > 1μm | Removal Rate ≥ 99% |
| SDI | ≤ 3 |
| Bacteria, Viruses | > 4 log |
| Turbidity | <0. 1NTU |
| TOC | Removal Rate: 0-25% |
*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products.
Product Parameters
Technical Parameters
| Filtering Type | Inside-out |
| Membrane Material | Modified PVC |
| MWCO | 100K Dalton |
| Membrane Area | 4.8m2 |
| Membrane ID/OD | 1.0mm/1.8mm |
| Dimensions | Φ90mm*1190mm |
| Connector Size | DN25 Union Joint |
Application Data
| Pure Water Flux | 1,500L/H (0.15MPa, 25C) |
| Designed Flux | 35-100L/m2.hr (0.15MPa, 25C) |
| Suggested Working Pressure | ≤ 0.2MPa |
| Maximum Transmembrane Pressure | 0.2MPa |
| Maximum Working Temperature | 45C |
| PH Range | Working: 4-10; Washing: 2-12 |
| Operating Mode | Cross-flow or Dead-end |
Feeding Water Requirements
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.
| Turbidity | ≤ 15NTU |
| Oil & Grease | ≤ 2mg/L |
| SS | ≤ 20mg/L |
| Total Iron | ≤ 1mg/L |
| Continuous Residual Chlorine | ≤ 5ppm |
| COD | Suggested ≤ 500mg/L |
*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.
Operating Parameters
| Maximum Backwashing Pressure | 0.2MPa |
| Backwashing Flow Rate | 100-150L/m2.hr |
| Backwashing Frequency | Every 30-60min. |
| Backwashing Duration | 30-60s |
| CEB Frequency | 0-4 times per day |
| CEB Duration | 5-10min. |
| CIP Frequency | Every 1-3 months |
| Washing Chemicals: | |
| Sterilization | 15ppm Sodium Hypochlorite |
| Organic Pollution Washing | 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide |
| Inorganic Pollution Washing | 1-2% Citric Acid/0.2% Hydrochloric Acid |
Component Material
| Component | Material |
| Membrane | Modified PVC |
| Sealing | Epoxy Resins |
| Housing | UPVC |
Product detail pictures:
Related Product Guide:
Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for China Manufacturer for Water Membrane Filtration - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo , The product will supply to all over the world, such as: Macedonia , Amsterdam , Swansea , We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
By Hilda
from Nepal
- 2017.04.28 15:45
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Arlene
from Greece
- 2017.10.23 10:29
Write your message here and send it to us
Products categories
-
Massive Selection for Membrane Filtration Syste...
-
Top Quality Waste Water Filtration - UF Membra...
-
Factory Cheap Cross Flow Ultrafiltration - MBR...
-
PriceList for Uf Membrane Filter - MCR Membran...
-
Big discounting Polyvinylidene Fluoride Membran...
-
Renewable Design for Hollow Fiber Membrane Filt...