Factory best selling Water Ultrafiltration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We have quite a few great team customers very good at internet marketing, QC, and dealing with kinds of troublesome trouble while in the output approach for Hollow Fiber Membrane Water Filter , Water Treatment Systems , Uf Membrane Use , Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our attention at all times.

Factory best selling Water Ultrafiltration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.

Filtration Performance

No.	Item	Water Output Index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

product-description1

Technical Parameters

Structure	Outside-in
Membrane Material	Reinforced Modified PVDF
Precision	0.1 micron
Membrane Area	25m2
Membrane ID/OD	1.0mm/ 2.2mm
Size	785mm×2000mm×40mm
Joint Size	DN32

Component Material

Component	Material
Hollow Fiber Membrane	Reinforced Modified PVDF
Sealing Compound	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Application Parameters

Designed Flux	10~25L/m2.h
Backwashing Flux	30~60L/m2.h
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	0~-35KPa
Maximum backwashingPressure	100KPa
Operating Mode	9min Operation+1min Break/8min Operaetion+2min Break
Blowing Mode	Continuous Aeration
Aeration Rate	4m3/h.pc
Washing Period	Clean water backwashing every 2~4h; CEB every 2~4 weeks; CIP every 6~12 months

Using Conditions

There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.

Item	Value
PH Range	5~9 (washing: 2~12)
Particle Size	<2mm, no sharp particles
Oil & Grease	≤2mg/L
Hardness	≤150mg/L

Product detail pictures:

Related Product Guide:

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Factory best selling Water Ultrafiltration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Berlin , Haiti , Mumbai , Our company regards reasonable prices, high quality,efficient production time and good after-sales service as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.

Filtration Water