factory customized Ultrafiltration Water System - MCR Membrane Module Reinforced PVDF BM-SLMCR-20 RO Pretreatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Uf Permeate , Uf System , Polyvinylidene Fluoride Membrane , We sincerely hope to establish some satisfactory relationships with you in the near future. We will keep you informed of our progress and look forward to building steady business relations with you.
factory customized Ultrafiltration Water System - MCR Membrane Module Reinforced PVDF BM-SLMCR-20 RO Pretreatment – Bangmo Detail:

Product Overview

Submerged ultrafiltration (MCR) Technology is a water treatment technology which combines membrane technology and physico-chemical precipitation process. High-precision sludge-water separation of outlet from coagulation sedimentation tank can  be  done  by  submerged  ultrafiltration  (MCR),  high  filtering  precision  of memrbane insures high quality and clear water outlet.

This product adopts reinforced modified PVDF material, which will not peel or break  during  backwashing,  meanwhile  it  has  good  permeable  rate,  mechanical performance, chemical resistance and anti-fouling  ability. ID  & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.03 micron.  Filtering  direction  is  outside-in,  that  is raw  water,  driven by  differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

● Purification of surface water;

● Reuse of heavy metal waste water;

● Pretreatment of RO.

Filtration Performance

Below  filtration  effects  are  proved  according  to  the  use  of modified  PVDF hollow fiber ultrafiltration membrane in different types of water:

No. Item Water Output Index
1 TSS ≤1mg/L
2 Turbidity ≤ 1

Specifications

Size

svdsvs

Chart 1 MBR Size

Technical Parameters:

Filtering Direction Outside-in
Membrane Material Reinforced Modified PVDF
Precision 0.03  micron
Membrane Area 20m2
Membrane ID/OD 1.0mm/ 2.2mm
Size 785mm×1510mm×40mm
Joint Size DN32

Component Material:

Component Material
Hollow Fiber Membrane Reinforced Modified PVDF
Sealing Compound Epoxy Resins + Polyurethane (PU)
Housing ABS

Using Conditions

Proper   pretreatments   must   be   set   when   raw   water   contains   a   lot   of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove  foams  in membrane tank when necessary, please use  alcoholic  defoamer which is not easy to scale.

Item Limit Remark
PH Range 5-9 (2- 12 when washing) Neutral PH is better for bacterial culture
Particle Diameter <2mm Prevent sharp particles to scratch membrane
Oil & Grease ≤2mg/L Prevent membrane fouling/sharp flux decrease
Hardness ≤150mg/L Prevent membrane scaling

Application Parameters:

Designed Flux 15~40L/m2.h
Backwashing Flux Twice the designed flux
Operating Temperature 5~45°C
Maximum Operating Pressure -50KPa
Suggested Operating Pressure ≤-35KPa
Maximum backwashing Pressure 100KPa
Operating Mode Continuous opeartion, intermittent backwashing air flushing
Blowing Mode Continuous Aeration
Aeration Rate 4m3/h.piece
Washing Period Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months(Above information is for reference only, please adjustaccording to actual differential pressure change rule)

Product detail pictures:

factory customized Ultrafiltration Water System -
 MCR Membrane Module Reinforced PVDF BM-SLMCR-20 RO Pretreatment – Bangmo detail pictures


Related Product Guide:

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for factory customized Ultrafiltration Water System - MCR Membrane Module Reinforced PVDF BM-SLMCR-20 RO Pretreatment – Bangmo , The product will supply to all over the world, such as: New Zealand , Pretoria , Bogota , We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our to meet your needs.
  • The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
    5 Stars By Murray from Los Angeles - 2017.11.11 11:41
    The company keeps to the operation concept scientific management, high quality and efficiency primacy, customer supreme, we have always maintained business cooperation. Work with you,we feel easy!
    5 Stars By Erin from Seattle - 2017.04.28 15:45
    Write your message here and send it to us