English
Factory Outlets Purification System - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo Featured Image
  • Factory Outlets Purification System - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo

Factory Outlets Purification System - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

abide by the contract, conforms to the market requirement, joins in the market competition by its high quality as well as provides more comprehensive and excellent service for clients to let them become big winner. The pursue of the company, is the clients' satisfaction for Membrane Bioreactor System , Membrane Microfilter , Ultrafiltration In Wastewater Treatment , Our ultimate target is usually to rank as a good brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you!
Factory Outlets Purification System - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical  reaction  in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.

This product adopts reinforced modified PVDF material, which will not peel or break  during  backwashing,  meanwhile  it  has  good  permeable  rate,  mechanical performance,  chemical  resistance  and  anti-fouling  ability.  ID  &  OD  of  reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.1 micron.  Filtering  direction  is  outside-in,  that  is  raw  water,  driven  by  differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

●Treatment, recycle and reuse of industrial waste water;

●Treatment of refuse leachate;

●Upgrade and reuse of municipal sewage.

Filtration Performance

Below  filtration  effects  are  proved  according  to  the  use  of  modified  PVDF hollow fiber ultrafiltration membrane in different types of water:

No. Item Water Output Index
1 TSS ≤1mg/L
2 Turbidity ≤1
3 CODcr Removal rate depends on the bio-chemical performance & designed sludge concentration
4 NH3-H (Instant removal rate ≤30% without bio-chemical)

Specifications

Size

svsdv

Technical Parameters:

Filtering Direction Outside-in
Membrane Material Reinforced Modified PVDF
Precision 0.1  micron
Membrane Area 20m2
Membrane ID/OD 1.0mm/ 2.2mm
Size 785mm×1510mm×40mm
Joint Size DN32

Component Material:

Component Material
Hollow Fiber Membrane Reinforced Modified PVDF
Sealing Compound Epoxy Resins + Polyurethane (PU)
Housing ABS

Using Conditions

Proper   pretreatments   must   be   set   when   raw   water   contains   a   lot   of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams  in  membrane tank when  necessary,  please  use alcoholic defoamer which is not easy to scale.

Item Limit Remark
PH Range 5-9 (2-12 when washing) Neutral PH is better for bacterial culture
Particle Diameter <2mm Prevent sharp particles to scratch membrane
Oil & Grease ≤2mg/L Prevent membrane fouling/sharp flux decrease
Hardness ≤150mg/L Prevent membrane scaling

Application Parameters:

Designed Flux 10~25L/m2.h
Backwashing Flux Twice the designed flux
Operating Temperature 5~45°C
Maximum Operating Pressure -50KPa
Suggested Operating Pressure ≤-35KPa
Maximum backwashing Pressure 100KPa
Operating Mode Operate 9min & Stop 1min/Operate 8min & Stop 2min
Blowing Mode Continuous Aeration
Aeration Rate 4m3/h.piece
Washing Period Clean water backwashing every 2~4h; CEB every 2~4 days;Offline washing every 6~12 months(Above information is for reference only, please adjustaccording to actual differential pressure change rule)
Product detail pictures:

Factory Outlets Purification System - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo detail pictures

Related Product Guide:
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Factory Outlets Purification System - MBR Membrane Module Reinforced PVDF BM-SLMBR-20 Sewage Treatment – Bangmo , The product will supply to all over the world, such as: Seychelles , Washington , Turkey , We follow up the career and aspiration of our elder generation, and we are eager to open up a new prospect in this field, We insist on Integrity, Profession, Win-win Cooperation, because we have a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
    • The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Laura from Nigeria - 2018.06.09 12:42
    The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Judy from Rio de Janeiro - 2017.05.02 18:28
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close