Hot sale Membrane Industry - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for Membrana Uf , Cross Flow Ultrafiltration , Hollow Fiber Membrane , Welcome your visiting and any your inquires,sincerely hope we can have chance to cooperate with you and we can build up long well business relationship with you.

Hot sale Membrane Industry - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.

Filtration Performance

No.	Item	Water Output Index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

product-description1

Technical Parameters

Structure	Outside-in
Membrane Material	Reinforced Modified PVDF
Precision	0.1 micron
Membrane Area	25m2
Membrane ID/OD	1.0mm/ 2.2mm
Size	785mm×2000mm×40mm
Joint Size	DN32

Component Material

Component	Material
Hollow Fiber Membrane	Reinforced Modified PVDF
Sealing Compound	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Application Parameters

Designed Flux	10~25L/m2.h
Backwashing Flux	30~60L/m2.h
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	0~-35KPa
Maximum backwashingPressure	100KPa
Operating Mode	9min Operation+1min Break/8min Operaetion+2min Break
Blowing Mode	Continuous Aeration
Aeration Rate	4m3/h.pc
Washing Period	Clean water backwashing every 2~4h; CEB every 2~4 weeks; CIP every 6~12 months

Using Conditions

There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.

Item	Value
PH Range	5~9 (washing: 2~12)
Particle Size	<2mm, no sharp particles
Oil & Grease	≤2mg/L
Hardness	≤150mg/L

Product detail pictures:

Related Product Guide:

With this motto in mind, we've come to be one of quite possibly technologically innovative, cost-efficient, and price-competitive manufacturers for Hot sale Membrane Industry - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: India , Brunei , Romania , If any item be of interest to you, please let us know. We will try our to satisfy your requirements with high quality products, the lower prices and prompt delivery. Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.

Mbr Wastewater Treatment Plant