Manufacturer of Membrane Process - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo
Manufacturer of Membrane Process - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water Output Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering Direction | Outside-in |
| Membrane Material | Reinforced Modified PVDF |
| Precision | 0.03 micron |
| Membrane Area | 25m2 |
| Membrane ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint Size | DN32 |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH Range | 5-9 (2- 12 when washing) | Neutral PH is better for bacterial culture |
| Particle Diameter | <2mm | Prevent sharp particles to scratch membrane |
| Oil & Grease | ≤2mg/L | Prevent membrane fouling/sharp flux decrease |
| Hardness | ≤150mg/L | Prevent membrane scaling |
Application Parameters
| Designed Flux | 15~40L/m2.h |
| Backwashing Flux | Twice the designed flux |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested Operating Pressure | ≤-35KPa |
| Maximum backwashing Pressure | 100KPa |
| Operating Mode | Continuous opeartion, intermittent backwashing air flushing |
| Blowing Mode | Continuous Aeration |
| Aeration Rate | 4m3/h.piece |
| Washing Period | Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months
(Above information is for reference only, please adjust according to actual differential pressure change rule) |
Product detail pictures:
Related Product Guide:
To create more benefit for buyers is our business philosophy; shopper growing is our working chase for Manufacturer of Membrane Process - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo , The product will supply to all over the world, such as: Kenya , Dominica , Durban , We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
By Ryan
from Macedonia
- 2018.12.25 12:43
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Cornelia
from Iran
- 2017.06.19 13:51
Write your message here and send it to us
