English
Manufacturing Companies for Microfiltration Unit - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Featured Image
  • Manufacturing Companies for Microfiltration Unit - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Manufacturing Companies for Microfiltration Unit - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for Waste Water Filter System , Uf Membrane , Wastewater Bioreactor , To acquire a consistent, profitable, and constant growth by getting a competitive advantage, and by continuously increasing the value added to our shareholders and our employee.
Manufacturing Companies for Microfiltration Unit - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:

No. Item Output Index
1 TSS ≤1mg/L
2 Turbidity ≤1
3 CODcr Removal rate depends on the bio-chemicalperformance & designed sludge concentration(Instant removal rate of membrane is ≤30% without

bio-chemical function)
4 NH3-H

Specifications

product-description1

Technical Parameters

Structure Outside-in
Membrane Material Reinforced Modified PVDF
Pore Size 0.1 micron
Membrane Area 30m2
Membrane ID/OD 1.0mm/2.2mm
Size 1250mm×2000mm×30mm
Joint Size Φ24.5mm

Application Parameters

Designed Flux 10~25L/m2.h
Backwashing Flux Twice the designed flux
Operating Temperature 5~45°C
Maximum Operating Pressure -50KPa
Suggested Operating Pressure ≤-35KPa
Maximum backwashing Pressure 100KPa
Operating Mode 8/9min on+2/1min pause
Aeration Mode Continuous Aeration
Aeration Rate 4m3/h.piece
Washing Period Clean water backwashing every 2~4h; CEB every 2~4 weeks;CIP every 6~12 months.           *Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof differentialpressure.

Using Conditions

Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not   easy to foul.

Item Value Remark
PH Operate: 5-9Wash: 2-12 Neutral PH is good for bacteria culture
Particle Diameter <2mm Sharp particles will scratch membrane
Oil & Grease ≤2mg/L High content will affect membrane flux
Hardness ≤150mg/L High content will cause fouling

Component Material

Component Material
Hollow Fiber Membrane Reinforced Modified PVDF
Sealing Compound Epoxy Resins + Polyurethane (PU)
Housing ABS
Product detail pictures:

Manufacturing Companies for Microfiltration Unit - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo detail pictures

Related Product Guide:
Our pursuit and firm aim should be to Always fulfill our buyer requirements. We carry on to produce and structure high quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for Manufacturing Companies for Microfiltration Unit - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Tajikistan , Wellington , Australia , We follow superior mechanism to process these goods that ensure optimum durability and reliability of the goods. We follow latest effective washing and straightening processes that enable us to supply unmatched quality of items for our clients. We continually strive for perfection and all our efforts are directed towards attaining complete client satisfaction.
    • The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Constance from Cyprus - 2017.05.02 11:33
    This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Page from Oman - 2018.12.11 11:26
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close