New Delivery for Mbr Plant - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Tubular Membrane Filter , Filtration Water , Membrane Filtration Water Treatment , With a wide range, high quality, reasonable rates and stylish designs, our products are extensively used with this industries and other industries.

New Delivery for Mbr Plant - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo Detail:

Applications

● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:

No.	Item	Water Output Index
1	TSS	≤1mg/L
2	Turbidity	≤ 1

Specifications

Size

product-description1

Chart 1 MBR Size

Technical Parameters

Filtering Direction	Outside-in
Membrane Material	Reinforced Modified PVDF
Precision	0.03 micron
Membrane Area	25m2
Membrane ID/OD	1.0mm/ 2.2mm
Size	785mm×2000mm×40mm
Joint Size	DN32

Component Material

Component	Material
Hollow Fiber Membrane	Reinforced Modified PVDF
Sealing Compound	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Using Conditions

Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.

Item	Limit	Remark
PH Range	5-9 (2- 12 when washing)	Neutral PH is better for bacterial culture
Particle Diameter	<2mm	Prevent sharp particles to scratch membrane
Oil & Grease	≤2mg/L	Prevent membrane fouling/sharp flux decrease
Hardness	≤150mg/L	Prevent membrane scaling

Application Parameters

Designed Flux	15~40L/m2.h
Backwashing Flux	Twice the designed flux
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	≤-35KPa
Maximum backwashing Pressure	100KPa
Operating Mode	Continuous opeartion, intermittent backwashing air flushing
Blowing Mode	Continuous Aeration
Aeration Rate	4m3/h.piece
Washing Period	Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months (Above information is for reference only, please adjust according to actual differential pressure change rule)

Product detail pictures:

Related Product Guide:

Often customer-oriented, and it's our ultimate target to become not only probably reputable, trustable and honest provider, but also the partner for our customers for New Delivery for Mbr Plant - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo , The product will supply to all over the world, such as: Bahamas , Croatia , Sri Lanka , Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this, our solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia.

Drinking Water Filter