PriceList for Water Treatment Filtration - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for Hollow Fiber Filter , Ultrafiltration Membrane , Membrane Solutions Water Filter , Currently, we are wanting ahead to even bigger cooperation with abroad customers according to mutual positive aspects. Be sure to sense free to contact us for more details.

PriceList for Water Treatment Filtration - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:

No.	Item	Output Index
1	TSS	≤1mg/L
2	Turbidity	≤1
3	CODcr	Removal rate depends on the bio-chemicalperformance & designed sludge concentration(Instant removal rate of membrane is ≤30% without bio-chemical function)
4	NH3-H

Specifications

product-description1

Technical Parameters

Structure	Outside-in
Membrane Material	Reinforced Modified PVDF
Pore Size	0.1 micron
Membrane Area	30m2
Membrane ID/OD	1.0mm/2.2mm
Size	1250mm×2000mm×30mm
Joint Size	Φ24.5mm

Application Parameters

Designed Flux	10~25L/m2.h
Backwashing Flux	Twice the designed flux
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	≤-35KPa
Maximum backwashing Pressure	100KPa
Operating Mode	8/9min on+2/1min pause
Aeration Mode	Continuous Aeration
Aeration Rate	4m3/h.piece
Washing Period	Clean water backwashing every 2~4h; CEB every 2~4 weeks;CIP every 6~12 months. *Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof differentialpressure.

Using Conditions

Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not easy to foul.

Item	Value	Remark
PH	Operate: 5-9Wash: 2-12	Neutral PH is good for bacteria culture
Particle Diameter	<2mm	Sharp particles will scratch membrane
Oil & Grease	≤2mg/L	High content will affect membrane flux
Hardness	≤150mg/L	High content will cause fouling

Component Material

Component	Material
Hollow Fiber Membrane	Reinforced Modified PVDF
Sealing Compound	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Product detail pictures:

Related Product Guide:

Bear Customer first, High quality first in mind, we perform closely with our consumers and provide them with efficient and experienced services for PriceList for Water Treatment Filtration - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: European , Guatemala , Sevilla , To keep the leading position in our industry, we never sgood challenging the limitation in all aspects to create the ideal products. In his way, We can enrich our life style and promote a better living environment for the global community.

This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!