Renewable Design for Mbr Wastewater Treatment Plant - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To fulfill the customers' over-expected satisfaction , we have now our strong crew to provide our great general assistance which incorporates promoting, gross sales, planning, creation, high quality controlling, packing, warehousing and logistics for Water Membrane , Ultrafiltration Systems Water Treatment , Hollow Fiber Filter , We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.
Renewable Design for Mbr Wastewater Treatment Plant - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo Detail:

Product Overview

UFc200BL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, mountain spring water and other sterile liquid.
  • Drinking treatment of tap water, surface water, well water, river water, etc.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity < 0.1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU.

Product Parameters

product-description1

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 34m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ200mm*1710mm
Connector Size DN50 Clamping

Application Data:

Pure Water Flux 10,000L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

Renewable Design for Mbr Wastewater Treatment Plant -
 UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo detail pictures

Renewable Design for Mbr Wastewater Treatment Plant -
 UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo detail pictures


Related Product Guide:

It is a good way to enhance our products and solutions and repair. Our mission will be to build creative solutions to consumers with a great experience for Renewable Design for Mbr Wastewater Treatment Plant - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo , The product will supply to all over the world, such as: Canberra , Cancun , Czech republic , As an experienced group we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of our company is to build up a satisfactory memory to all customers, and establish a long term win-win business relationship. Choose us, we always wait for your appearance!
  • It can be said that this is a excellent producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
    5 Stars By Erin from Turkey - 2018.09.16 11:31
    Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By May from Portugal - 2018.10.31 10:02
    Write your message here and send it to us