Special Design for Ultrafiltration Water Filter - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo
Special Design for Ultrafiltration Water Filter - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo Detail:
Applications
Production of mineral water, spring water, or other sterile liquid.
Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.
Filtration Performance
This product is proven to have below filtering effects according to the service conditions of different water sources:
| Ingredient | Effect |
| SS, Particles > 1μm | Removal Rate ≥ 99% |
| SDI | ≤ 3 |
| Bacteria, Viruses | > 4 log |
| Turbidity | <0. 1NTU |
| TOC | Removal Rate: 0-25% |
*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products.
Product Parameters
Technical Parameters
| Filtering Type | Inside-out |
| Membrane Material | Modified PVC |
| MWCO | 100K Dalton |
| Membrane Area | 4.8m2 |
| Membrane ID/OD | 1.0mm/1.8mm |
| Dimensions | Φ90mm*1190mm |
| Connector Size | DN25 Union Joint |
Application Data
| Pure Water Flux | 1,500L/H (0.15MPa, 25C) |
| Designed Flux | 35-100L/m2.hr (0.15MPa, 25C) |
| Suggested Working Pressure | ≤ 0.2MPa |
| Maximum Transmembrane Pressure | 0.2MPa |
| Maximum Working Temperature | 45C |
| PH Range | Working: 4-10; Washing: 2-12 |
| Operating Mode | Cross-flow or Dead-end |
Feeding Water Requirements
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.
| Turbidity | ≤ 15NTU |
| Oil & Grease | ≤ 2mg/L |
| SS | ≤ 20mg/L |
| Total Iron | ≤ 1mg/L |
| Continuous Residual Chlorine | ≤ 5ppm |
| COD | Suggested ≤ 500mg/L |
*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.
Operating Parameters
| Maximum Backwashing Pressure | 0.2MPa |
| Backwashing Flow Rate | 100-150L/m2.hr |
| Backwashing Frequency | Every 30-60min. |
| Backwashing Duration | 30-60s |
| CEB Frequency | 0-4 times per day |
| CEB Duration | 5-10min. |
| CIP Frequency | Every 1-3 months |
| Washing Chemicals: | |
| Sterilization | 15ppm Sodium Hypochlorite |
| Organic Pollution Washing | 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide |
| Inorganic Pollution Washing | 1-2% Citric Acid/0.2% Hydrochloric Acid |
Component Material
| Component | Material |
| Membrane | Modified PVC |
| Sealing | Epoxy Resins |
| Housing | UPVC |
Product detail pictures:
Related Product Guide:
We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Special Design for Ultrafiltration Water Filter - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo , The product will supply to all over the world, such as: Denmark , Estonia , Saudi Arabia , Our factory covers an area of 12,000 square meters, and has a staff of 200 people, among which there are 5 technical executives. We are specialized in producing.We have rich experience in export. Welcome to contact us and your enquiry will be replied as soon as possible.
By Marian
from El Salvador
- 2018.12.28 15:18
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Wendy
from UK
- 2017.05.02 18:28
Write your message here and send it to us
