Special Design for Ultrafiltration Water Filter - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our products are greatly recognized and trustworthy by users and will fulfill continually shifting economic and social requires for Ultra Filtration Plant , Filter System , Membrane Bioreactor Design , The continual availability of significant grade merchandise in combination with our excellent pre- and after-sales support ensures strong competitiveness in an increasingly globalized market.
Special Design for Ultrafiltration Water Filter - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo Detail:

Applications

●Production of mineral water, mountain spring water and other germ-free liquid.
●Drinking treatment of tap water, surface water, well water and river water.
●Pre-treatment of RO device.
●Treatment, recycle and reuse of industrial wastewater.

Filtration Performance

According to the service conditions of modified PVC hollow fiber ultrafiltration membrane which  are  applied to various water  sources, the  product  is  proved to reach below filtration effects:

Water Composition Filtering Effect
Suspended Substances, Particles >1um Removal Rate ≥99%
SDI ≤ 3
Virus, Bacteria >4 log
Turbidity <0.1NTU
TOC Removal Rate 0-25%

Above data is obtained when turbidity of feed water is less than 15NTU. The product is proved to reach the sanitary standards of drinking water by Health Department of Guangdong Province. Approval number is YUE WEI SHUI ZI 2014 S1671.

Product Parameters

Product Appearance

product-description1

Figure 1 Product Dimensions

Technical Parameters

Structure Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Nominal Membrane Area 16.5m2
Membrane ID/OD 1.0mm/1.8mm
Module Dimensions Φ180mm×1382mm
Connector Dimensions DN25 Female Thread

Application Data

Pure Water Flux 7,000L/H (0.15MPa, 25ºC)
Designed Flux 35-100L/H (0.15MPa, 25ºC)
Operating Pressure ≤0.2MPa
Maximum Trans Membrane Pressure 0.2MPa
Maximum Operating Temperature 45ºC
Operating PH Range 4-10
Washing PH Range 2-12
Operating Mode Cross-flow/Dead-end Filtration

Feed Water Requirements

A security filter, precision <50 micron, should be set as pretreatment of UF, in case of  blockage caused by large particles  in  raw water. Attention: UF membrane material is macromolecular organic plastics, raw water must not contain any organic solvents.

Feed Water Turbidity ≤15NTU
Oil & Grease ≤2mg/L
Feed Water SS ≤20mg/L
Total Iron ≤1mg/L
Continuous Feeding Residual Chlorine ≤5ppm
COD Suggested ≤500mg/L

Component Material

Component Material
Hollow Fiber Membrane Modified PVC
Potting Material Epoxy Resins
Membrane Housing SUS304

Typical Operating Parameters

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2 .h
Backwashing Frequency Every 30-60 minutes
Backwashing Duration 30-60 seconds
CEB Frequency 0-4 times/day
CEB Duration 5-10 minutes
CIP Frequency 1-3 months
General Washing Chemicals :
Disinfection 15ppm NaClO
Organic Contamination Washing 0.2% NaClo+0.1% NaOH
Inorganic Contamination Washing 1-2% Citric Acid /0.2% HCl

Product detail pictures:

Special Design for Ultrafiltration Water Filter -
 UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures

Special Design for Ultrafiltration Water Filter -
 UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures


Related Product Guide:

With this motto in mind, we've got become among essentially technologically innovative, cost-efficient, and price-competitive manufacturers for Special Design for Ultrafiltration Water Filter - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo , The product will supply to all over the world, such as: Argentina , Auckland , Eindhoven , We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our products are favored by domestic and foreign customers. With your support, we will build a better tomorrow!
  • The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Olga from Honduras - 2018.09.21 11:44
    The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Anna from Venezuela - 2017.06.19 13:51
    Write your message here and send it to us