Well-designed Mbr Water Treatment - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To create more value for customers is our business philosophy; customer growing is our working chase for Water Filter Water Purifier , Tubular Membrane Module , Water Treatment Filter , We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
Well-designed Mbr Water Treatment - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo Detail:

Applications

●Production of mineral water, mountain spring water and other germ-free liquid.
●Drinking treatment of tap water, surface water, well water and river water.
●Pre-treatment of RO device.
●Treatment, recycle and reuse of industrial wastewater.

Filtration Performance

According to the service conditions of modified PVC hollow fiber ultrafiltration membrane which  are  applied to various water  sources, the  product  is  proved to reach below filtration effects:

Water Composition Filtering Effect
Suspended Substances, Particles >1um Removal Rate ≥99%
SDI ≤ 3
Virus, Bacteria >4 log
Turbidity <0.1NTU
TOC Removal Rate 0-25%

Above data is obtained when turbidity of feed water is less than 15NTU. The product is proved to reach the sanitary standards of drinking water by Health Department of Guangdong Province. Approval number is YUE WEI SHUI ZI 2014 S1671.

Product Parameters

Product Appearance

product-description1

Figure 1 Product Dimensions

Technical Parameters

Structure Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Nominal Membrane Area 16.5m2
Membrane ID/OD 1.0mm/1.8mm
Module Dimensions Φ180mm×1382mm
Connector Dimensions DN25 Female Thread

Application Data

Pure Water Flux 7,000L/H (0.15MPa, 25ºC)
Designed Flux 35-100L/H (0.15MPa, 25ºC)
Operating Pressure ≤0.2MPa
Maximum Trans Membrane Pressure 0.2MPa
Maximum Operating Temperature 45ºC
Operating PH Range 4-10
Washing PH Range 2-12
Operating Mode Cross-flow/Dead-end Filtration

Feed Water Requirements

A security filter, precision <50 micron, should be set as pretreatment of UF, in case of  blockage caused by large particles  in  raw water. Attention: UF membrane material is macromolecular organic plastics, raw water must not contain any organic solvents.

Feed Water Turbidity ≤15NTU
Oil & Grease ≤2mg/L
Feed Water SS ≤20mg/L
Total Iron ≤1mg/L
Continuous Feeding Residual Chlorine ≤5ppm
COD Suggested ≤500mg/L

Component Material

Component Material
Hollow Fiber Membrane Modified PVC
Potting Material Epoxy Resins
Membrane Housing SUS304

Typical Operating Parameters

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2 .h
Backwashing Frequency Every 30-60 minutes
Backwashing Duration 30-60 seconds
CEB Frequency 0-4 times/day
CEB Duration 5-10 minutes
CIP Frequency 1-3 months
General Washing Chemicals :
Disinfection 15ppm NaClO
Organic Contamination Washing 0.2% NaClo+0.1% NaOH
Inorganic Contamination Washing 1-2% Citric Acid /0.2% HCl

Product detail pictures:

Well-designed Mbr Water Treatment -
 UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures

Well-designed Mbr Water Treatment -
 UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures


Related Product Guide:

We believe that prolonged expression partnership is really a result of front end of range, value added support, rich encounter and personal contact for Well-designed Mbr Water Treatment - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo , The product will supply to all over the world, such as: Jordan , Gambia , Pretoria , Since the establishment of our company, we've realized the importance of providing good quality goods and whole heartedly before-sales and after-sales services. problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.
  • Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By Roberta from Suriname - 2018.06.28 19:27
    Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
    5 Stars By Barbara from Colombia - 2017.10.13 10:47
    Write your message here and send it to us